Paper Pieced Pineapple Blocks, and MQ on R/W/B

Friday, I dashed home after work, full of energy and inspiration, and dove into sewing Pineapple Blocks - little ones - these finish at 6 inches. Paper had not been removed in this photo. What will I do with them? LOL It took me about 40 minutes per block, and after doing 5, (with breaks between) I cleaned up the mess on the floor, then started again on Saturday, then ..., and by Sunday I had 15. Once again, it's just left-over strips. Of course, there is no diminishing of stash amount that I can tell. Guess I'll keep working on more. The turquoise blue perks up the sedate fabrics.

I had gotten bored with machine quilting on this red/white/black quilt and needed a break. But, here is an example of one area I quilted, with a scroll-y design.

Christmas Tree Skirt - Done

Instead of a binding around the center circle, I chose to add a fused facing. After panicking for a few hours, I realized this is just like the facings I used to put around collars, back in the days of garment sewing. I dug out my 'professional' compass and marked the line, then remarked it bigger, then smaller! LOL Then I sewed - I seem to remember the term "staystitching"-- the line in preparation for cutting out the circle.

(Oh crud - I added these photos using a new method and they don't leave me room under the photos for text. I know you can figure it out but it's a little confusing.)


I opted to make a slit in the skirt, as opposed to a center hole only, but that DID leave a very acute angle to bind, something I've not done before. However, a bit of fiddling, and some hand holding by fellow quilters, sent me in the right direction which ended up with satisfactory, pointy points.




Done, and ready to mail - with optional ties. It's about 54 inches on widest points. No pattern, I just made it up, starting with a basic star block. Any blocks with a single diagonal line can be made log cabin style. That left it square, and I wanted to have 8 sides, so I added the 4 Log Cabin sides (with triangles in center along seam line.)

Itsy bitsy bit of thread

This morning I was awake early, full of enthusiasm, wanting to get to quilting the Christmas Tree Skirt, but my normally dependable machine would NOT cooperate. Thread nests, pokeys, snarls, threads not laying flat on top. And I had put in very good, expensive thread, both top and bottom. Changed threads, re-threaded, changed feet, and nada, nada -- even tried a second new needle. Then I got out a flashlight and looked as well as possible into the tension area. I could not discover any method to remove the cover OFF to look closer, but I DID see just a bit of extra threads in there. Sure enough, with my tiny tweezers, I pulled it out -- a small fuzzy, knotty wad of thread. Voila - problem resolved.

I always have the feeling there is still a small bit of invisible thread in there. Anyone know how to remove the cover from the tension disks, on a Janome MC6500?

Ready for Quilting!

I'm lovin' it! Next is the quilting, then I will bind it in that dark green. My inside corners are fixed, with some fiddling and hand sewing. Whew - THAT issue was a learning experience!

It's laying on batting -- I can baste it in the house. It's about 58 x 58 inches.

Oh my, how will I ever cut into it, for the slit and the tree hole? Yikes!

Uh oh - mess up on the inside corner

This is my Tree Skirt, and I'm planning on adding HSTs around the entire perimeter - they are already made. I figured that inside corner would sew up to a nice 45 degree angle to possibly hand stitch together. I carefully sewed to the stopping point - you know, stop at 1/4 short of the seam end.


A little messy, but "it will be OK." I sewed the HST's (not shown on the above top) to the triangular log cabin units on the side.

But look what happens!
They don't match up at all! What the heck????

OK, some of you are laughing because YOU know why, but I learn best by doing, even if doing is wrong! lol

I sure was surprised and even put out some calls for HELP!!!

After thinking for 2 hours I realize that the diagonal measurement (see the triangle) is longer than the leg of the triangle! I hope the photos describe better than what I'm trying to say. If you make this kind of inside corner, with HSTs, you cannot have a continuous line of HSTs because now, they measure a different width since they are on an angle.

My solution is to remove the HSTs from the triangular log cabin blocks, then border them with plain strips, at 1 3/8 raw. The HSTs are 2 inches raw. IMHO - (that mean don't bet money on me!) This is because a strip that is 1 3/8 inch on the diagonal, measures a bit shy of 2 inches from edge to edge - the size of my HST. (Remember how you figure a block size on the diagonal - measure block size x 1.414)

Next time, I'll draw it out. I jes' LOVE learning experiences? 8-))

WIP, Christmas Tree Skirt

Whew - gotta remember my geometry! I didn't use a pattern., and there's still a lot of work, but you can see where I'm going. The HSTs go all around the perimeter. Those inside corners should meet at 45 degrees, and therefore NOT be an issue but ... wish me luck! The center hole will be faced, then I'll use normal binding around the edges.

There were bias issues on the side log cabin triangle blocks, so I had to make additional minor adjustments to the seams.

I'll bet all you quilters are just like me -- when you give a quilt you feel compelled to explain all the ins and outs and techniques used, to a non-quilter who, most likely, has no idea what you are talking about! LOL

Enjoy your weekend -- and Happy Quilting!